-
Change Country
-
English
- Sign in
- Source Now
Get it by Apr 5, Friday
We deliver to your doorstep under DAP terms. Customs clearance is for your account
Payment
Delivery
Item | Ear Clamp |
---|---|
Band Material | Zinc Plated Steel, Material no. 1.0338/SAE 1008/1010 |
Band Thickness | 0.0393" |
Band Width | 0.276" |
Finish | Zinc Plated |
Material | Zinc Plated Steel, Material no. 1.0338/SAE 1008/1010 |
---|---|
Pack Size | 100 |
Size Range | 8.1 mm to 11 mm |
Size Reference | 0811 |
Type | 2 Ear |
Oetiker 10100011 hose clamp offers a wide range of features that makes it suitable for low-pressure applications, such as agriculture, automobile maintenance & repair, HVAC, food & beverage dispensing and more. These zinc-plated ear clamps are used with rubber hoses, plastic tubing, electrical cables & welding hoses.
Height (cm) | 1.5 |
---|---|
Length (cm) | 5.99 |
Width (cm) | 2.01 |
HS Code | 7326908588 |
Country Of Origin | CA |
---|---|
Weight (kg) | 0.2475 |
UPC | 848879015776 |
Ear hose clamps come in a variety of shapes, styles and sizes. Most of them follow the same approaches for proper placement on a hose/ tube/ pipe fitting. After securely pressing the hose on the mating part, place the hose clamp towards the hose end (with approximately 1/4 inch space between the clamp and the end of the hose).
Oetiker offers a broad range of clamps, including screw, ear, spring, wire, worm gear and plastic clamps.
Oetiker 2 ear clamps have a larger clamping range than the 1 ear clamps. 2 ear clamps offer high clamping force, creating a spring effect during contraction and extension of the hose.
Users can use a rotating / bowl nose cutter or a side cutter for removing Oetiker clamps. However, rotating cutters are not recommended as they might tamper or damage the hose while cutting the clamp.
Raptor Supplies also offers Oetiker stepless low profile clamps that are reusable in nature. They can be opened and installed multiple times and can be mounted both radially & axially. Oetiker's low profile, universal, screw & profile clamps are also reusable.
Analyse and measure the outer diameter (OD) of the hose installed on fitting. Choose a hose clamp in a way that the outer diameter of the hose falls approximately in the middle of the clamping range.
To tighten a clamp, squeeze the clamp with one hand so that the end opposite to the driver slides into the sleeve holding. Then, turn the driver clockwise with a wrench or screwdriver so that the threads present on the driver engage the slots on the clamp. Continue turning the driver until the clamp tightens around the hose tightly and securely.
Please note that the item you have bought is a 115V.