Soil Testing Penetrometers

Use low-strength soil adapter feet to increase the effective area measured by a factor of 16 times. To obtain the correct unconfined compressive strength, divide the value obtained (on the low-load side) by 16.

Pocket penetrometers are not individually calibrated so there are no calibration certificates. Errors up to 1/2 division on the scale (equivalent to 0 to 0.124 TSF) are possible with these soil penetrometers.

Special training is necessary for properly using a penetrometer and interpreting the test results. It should cover the following points:

• Soil mechanics: The user must understand the fundamental principles of soil behaviour and how it responds to stress and strain.
• Use of Penetrometer: Proper technique for operating a penetrometer, including how to prepare the soil for testing, how to perform the test and how to interpret the results.
• Soil classification: Understanding how to classify soil based on its properties and characteristics, such as its texture, structure and consistency.
• Soil compaction: The user must know various factors that contribute to soil compaction and how to perform the related test using a penetrometer.
• Data analysis and interpretation: Understanding how to analyse and interpret the data collected from soil testing which includes calculating soil stiffness, compaction and other parameters.

• Clean the penetrometer after each use to remove any signs of dust or debris from interfering with future tests.
• Store the device in a dry, clean and protected place. Use a protective case or container to keep it safe from moisture, dust and extreme temperatures when not in use.
• Inspect the penetrometer regularly for signs of wear and damage, including cracks or dents. Repair or replace any parts (if necessary) to ensure accurate results.
• Calibrate the testing device regularly to ensure accurate results from it.

Yes, customers can opt for Humboldt soil testing penetrometer accessories that includes penetration needles, cones, replacement tips and penetrometer extractor jacks.

• Determine your testing purpose.
• Select the right probe.
• Check the required depth range.
• Ensure measurement accuracy.
• Consider data logging capabilities.
• Assess field use convenience.
• Stay within budget.
• Note calibration needs.
• Choose a rugged build.
• Look for safety features.

• Remove soil debris.
• Wipe the penetrometer clean.
• Check calibration regularly.
• Lubricate moving parts if needed.
• Store in a protective case.
• Periodically inspect for damage.
• Recalibrate if necessary.
• Follow manufacturer's guidelines.