Please note that the item you have bought is a 115V.

DC Gearmotors | Raptor Supplies Worldwide

DC Gearmotors

Filter

BOSTON GEAR -

DC Permanent Magnet Motors

StyleModelPrice (ex. VAT)
APM18500TF-B$7,114.86
BPM18100TF$752.48
RFQ
StyleModelOverhung LoadFull Load AmpsGear RatioReplacement BrushesRPM RangeInput HPLength Less ShaftMax. TorquePrice (ex. VAT)
A2H569115 lb.0.26362:16YHY30 to 151/208"160 in.-lb.$514.44
A2H565130 lb.1.0849:16YHY631 to 501/108.75"150 in.-lb.$526.51
A2H567150 lb.0.5896:16YHY316 to 301/207.375"150 in.-lb.$530.89
A2H561220 lb.1.0813:16YHY6100 to 1501/108.75"42 in.-lb.$489.56
A2H563230 lb.1.0825:16YHY651 to 751/108.75"83 in.-lb.$526.49
LEESON -

DC Gearmotors

StyleModelItemPrice (ex. VAT)
AM1115020.00DC Gearmotor$1,012.70
BM1135252.00DC Gearmotor$1,275.80
CM1125281.00DC Gearmotor$1,523.21
DM1135251.00DC Gearmotor$1,275.80
EM1135064.00DC Gearmotor$1,257.34
FM1135039.00DC Gearmotor$1,166.86
GM1125278.00DC Gearmotor$1,534.29
HM1125279.00DC Gearmotor$1,534.29
IM1115018.00DC Gearmotor$1,012.70
JM1135063.00DC Gearmotor$1,257.34
KM1125275.00DC Gearmotor$1,521.36
LM1135297.00DC Gearmotor$1,358.89
MM1135038.00DC Gearmotor$1,166.86
NM1115019.00DC Gearmotor$1,012.70
OM1135069.00DC Gearmotor$1,166.86
PM1135041.00DC Gearmotor$1,254.70
QM1115022.00DC Gearmotor$1,012.70
RM1135046.00DC Gearmotor$1,257.34
SM1125277.00DC Gearmotor$1,534.29
TM1135042.00DC Gearmotor$931.65
UM1135045.00DC Gearmotor$824.03
VM1135062.00DC Gearmotor$1,257.34
WM1125074.00DC Gearmotor$959.20
XM1125071.00Motor$971.14
YM1135045.00Motor$986.89
DAYTON -

301 Series DC Gearmotors, TENV, 90VDC

Dayton 301 Series DC gearmotors provide desired ratio and torque to run equipment using gear mechanism. These 90VDC rated gearmotors are ideal for running wheelchairs, hospital beds, table lifts and power seats. They consist of a motor, steel gears and bearings having die-cast aluminium TENV housing. The permanent magnet parallel shaft features ball bearings for smooth operation. They are permanently lubricated with fluid gear oil to prevent friction and damage to components. Spring-loaded lip sealing prevents ingress of contaminants. Choose from a wide range of these 301 Series gearmotors, available in speed ratings of 18, 34, 51 and 109 RPM on Raptor Supplies.

StyleModelGear RatioMax. TorqueNameplate RPMRPM RangePrice (ex. VAT)
A4Z13117:127 in.-lb.109100 to 150$533.55
A4Z13235:155 in.-lb.5151 to 75$582.06
A4Z13353:182 in.-lb.3431 to 50$558.78
A4Z134101:1150 in.-lb.1816 to 30$592.13
DAYTON -

101 Series DC Gearmotors, TENV, 90VDC

Dayton 101 Series DC gearmotors provide desired ratio and torque to run an equipment with gear mechanism. These 90VDC rated gearmotors are ideal for running wheelchairs, hospital beds, table lifts and power seats. They consist of a motor, steel gears and bearings w/ die-cast aluminium TENV housing. The permanent magnet parallel shaft features ball bearings for smooth operation in both clockwise and anti-clockwise directions. They are permanently lubricated with fluid gear oil to prevent friction and damage to components. Spring-loaded lip sealing prevents ingress of contaminants. Choose from a wide range of these 101 Series gearmotors, available in 1/40 and 1/20 HP input power ratings on Raptor Supplies.

StyleModelRPM RangeFull Load AmpsGear RatioInput HPLength Less ShaftMax. TorqueNameplate RPMOverall LengthPrice (ex. VAT)
A6Z9110 to 150.36362:11/407.375"100 in.-lb.58.375"$479.74
A6Z9120 to 150.36186:11/407.375"100 in.-lb.9.68.375"$472.23
A6Z91316 to 300.6296:11/207.5"100 in.-lb.208.5"$465.29
A6Z91431 to 500.6249:11/207.5"74 in.-lb.378.5"$446.53
A6Z91551 to 750.6225:11/207.5"40 in.-lb.718.5"$503.08
A6Z916100 to 1500.6213:11/207.5"20 in.-lb.1398.5"$495.05
BISON GEAR & ENGINEERING -

Gearmotor, 12

StyleModelOverhung LoadFull Load AmpsGear RatioInput HPMax. TorqueNameplate RPMNo Load RPMOverall LengthPrice (ex. VAT)
A021-720A0010270 lb.11.6010:11/835.0 in.-lb.18018013 37/64"$1,217.51
A021-720A0015305 lb.11.6015:11/852.0 in.-lb.12012013 37/64"$1,217.51
A021-720A0020330 lb.11.6020:11/870.0 in.-lb.909013 37/64"$1,217.51
A021-725A0010355 lb.18.6010:11/555.0 in.-lb.18018014 1/64"$1,316.54
A021-720A0030370 lb.11.6030:11/8104.0 in.-lb.606013 37/64"$1,217.51
A021-720A0040400 lb.11.6040:11/8139.0 in.-lb.454513 37/64"$1,217.51
A021-725A0015400 lb.18.6015:11/583.0 in.-lb.12012014 1/64"$1,316.54
A021-720A0050430 lb.11.6050:11/8173.0 in.-lb.363613 37/64"$1,217.51
A021-725A0020430 lb.18.6020:11/5111.0 in.-lb.909014 1/64"$1,316.54
A021-720A0060455 lb.11.6060:11/8208.0 in.-lb.303013 37/64"$1,217.51
A021-725A0030475 lb.18.6030:11/5166.0 in.-lb.606014 1/64"$1,316.54
A021-720A0080490 lb.11.6080:11/8277.0 in.-lb.232313 37/64"$1,217.51
A021-725A0040510 lb.18.6040:11/5222.0 in.-lb.454514 1/64"$1,316.54
A021-720A0100525 lb.11.60100:11/8346.0 in.-lb.181813 37/64"$1,217.51
A021-720A0120550 lb.11.60120:11/8415 in.-lb.151513 37/64"$1,217.51
A021-725A0050550 lb.18.6050:11/5277.0 in.-lb.363614 1/64"$1,316.54
A021-725A0060580 lb.18.6060:11/5332.0 in.-lb.303014 1/64"$1,316.54
A021-725A0080620 lb.18.6080:11/5443.0 in.-lb.232314 1/64"$1,328.03
A021-720A0150635 lb.6.50150:11/15277.0 in.-lb.121211 29/32"$1,134.40
A021-720A0180670 lb.6.50180:11/15332.0 in.-lb.101011 29/32"$1,134.40
A021-720A0240725 lb.6.50240:11/15442.0 in.-lb.7.57.511 29/32"$1,134.40
A021-725A0100740 lb.11.60100:11/8346.0 in.-lb.181815 21/64"$1,220.69
A021-725A0120780 lb.11.60120:11/8415 in.-lb.151515 21/64"$1,220.69
A021-725A0150820 lb.11.60150:11/8519.0 in.-lb.121215 21/64"$1,220.69
A021-725A0180870 lb.11.60180:11/8623.0 in.-lb.101015 21/64"$1,220.69
BISON GEAR & ENGINEERING -

Gearmotor, 90

StyleModelOverhung LoadFull Load AmpsGear RatioInput HPMax. TorqueNameplate RPMNo Load RPMOverall LengthPrice (ex. VAT)
A021-720D0010270 lb.1.4510:11/835.0 in.-lb.17718013 37/64"$1,217.51
A021-720D0015305 lb.1.4515:11/852 in.-lb.11812013 37/64"$1,227.69
A021-720D0020330 lb.1.4520:11/870 in.-lb.899013 37/64"$1,217.51
A021-725D0010355 lb.2.2410:11/555.0 in.-lb.17318014 1/64"$1,316.54
A021-720D0030370 lb.1.4530:11/8104 in.-lb.596013 37/64"$1,227.69
A021-725D0015400 lb.2.2415:11/583.0 in.-lb.11512014 1/64"$1,316.54
A021-720D0040400 lb.1.4540:11/8139 in.-lb.444513 37/64"$1,217.51
A021-725D0020430 lb.2.2420:11/5111.0 in.-lb.869014 1/64"$1,316.54
A021-720D0050430 lb.1.4550:11/8173 in.-lb.353613 37/64"$1,227.69
A021-720D0060455 lb.1.4560:11/8208 in.-lb.303013 37/64"$1,217.51
A021-730D0010465 lb.3.0010:11/368 in.-lb.19621016 13/32"$1,572.19
A021-725D0030475 lb.2.2430:11/5166.0 in.-lb.586014 1/64"$1,316.54
A021-720D0080490 lb.1.4580:11/8277 in.-lb.222313 37/64"$1,217.51
A021-725D0040510 lb.2.2440:11/5222.0 in.-lb.434514 1/64"$1,316.54
A021-730D0015520 lb.3.0015:11/3102 in.-lb.13114116 13/32"$1,572.19
A021-720D0100525 lb.1.45100:11/8346 in.-lb.181813 37/64"$1,217.51
A021-720D0120550 lb.1.45120:11/8415 in.-lb.151513 37/64"$1,217.51
A021-725D0050550 lb.2.2450:11/5277.0 in.-lb.353614 1/64"$1,316.54
A021-730D0020565 lb.3.0020:11/3136 in.-lb.9810616 13/32"$1,572.19
A021-725D0060580 lb.2.2460:11/5332.0 in.-lb.293014 1/64"$1,316.54
A021-725D0080620 lb.2.2480:11/5443.0 in.-lb.222314 1/64"$1,316.54
A021-730D0030625 lb.3.0030:11/3205 in.-lb.657016 13/32"$1,572.19
A021-720D0150635 lb.1.00150:11/15277 in.-lb.121211 29/32"$1,134.40
A021-720D0180670 lb.1.00180:11/15332 in.-lb.101011 29/32"$1,134.40
A021-730D0040675 lb.3.0040:11/3273 in.-lb.495316 13/32"$1,572.19
BISON GEAR & ENGINEERING -

24V DC Gearmotors

StyleModelOverhung LoadFull Load AmpsGear RatioInput HPMax. TorqueNameplate RPMNo Load RPMOverall LengthPrice (ex. VAT)
A021-720C0010270 lb.5.9010:11/835.0 in.-lb.18018013 37/64"$1,217.51
A021-720C0015305 lb.5.9015:11/852.0 in.-lb.12012013 37/64"$1,217.51
A021-720C0020330 lb.5.9020:11/870.0 in.-lb.909013 37/64"$1,217.51
A021-725C0010355 lb.9.5010:11/555.0 in.-lb.18018014 1/64"$1,316.54
A021-720C0030370 lb.5.9030:11/8104.0 in.-lb.606013 37/64"$1,217.51
A021-725C0015400 lb.9.5015:11/583.0 in.-lb.12012014 1/64"$1,316.54
A021-720C0040400 lb.5.9040:11/8139.0 in.-lb.454513 37/64"$1,217.51
A021-725C0020430 lb.9.5020:11/5111.0 in.-lb.909014 1/64"$1,316.54
A021-720C0050430 lb.5.9050:11/8173.0 in.-lb.363613 37/64"$1,217.51
A021-720C0060455 lb.5.9060:11/8208.0 in.-lb.303013 37/64"$1,217.51
A021-730C0010465 lb.13.3010:11/379.0 in.-lb.25025016 13/32"$1,572.19
A021-725C0030475 lb.9.5030:11/5166.0 in.-lb.606014 1/64"$1,316.54
A021-720C0080490 lb.5.9080:11/8277.0 in.-lb.232313 37/64"$1,217.51
A021-725C0040510 lb.9.5040:11/5222.0 in.-lb.454514 1/64"$1,316.54
A021-730C0015520 lb.13.3015:11/3118.0 in.-lb.16716716 13/32"$1,572.19
A021-720C0100525 lb.5.90100:11/8346.0 in.-lb.181813 37/64"$1,217.51
A021-725C0050550 lb.9.5050:11/5277.0 in.-lb.363614 1/64"$1,316.54
A021-720C0120550 lb.5.90120:11/8415 in.-lb.151513 37/64"$1,217.51
A021-730C0020565 lb.13.3020:11/3158.0 in.-lb.12512516 13/32"$1,572.19
A021-725C0060580 lb.9.5060:11/5332.0 in.-lb.303014 1/64"$1,316.54
A021-725C0080620 lb.9.5080:11/5443.0 in.-lb.232314 1/64"$1,316.54
A021-730C0030625 lb.13.3030:11/3236.0 in.-lb.838316 13/32"$1,572.19
A021-720C0150635 lb.3.20150:11/15277.0 in.-lb.121211 29/32"$1,143.76
A021-720C0180670 lb.3.20180:11/15332.0 in.-lb.101011 29/32"$1,134.40
A021-730C0040675 lb.13.3040:11/3315.0 in.-lb.636316 13/32"$1,585.89
StyleModelFull Load AmpsGear RatioMax. TorqueNameplate RPMRPM RangePrice (ex. VAT)
A1Z8209.4082:1280 in.-lb.2316 to 30$486.43
A1Z82413.9836:1183 in.-lb.5031 to 50$449.10
A1Z82213.9858:1278 in.-lb.3131 to 50$506.18
A1Z83313.9811:157 in.-lb.170151 to 200$460.30
A1Z82613.9828:1150 in.-lb.6451 to 75$467.84
A1Z83113.9819:1102 in.-lb.9476 to 100$451.88
BOSTON GEAR -

DC HVAC Motors

StyleModelPrice (ex. VAT)
APM9100TF-5/8-B$1,530.40
BPM950T-WD$1,249.24
CPM9100TF-5/8-WD$1,978.18
DPM975T-WD$1,749.54
EPM1875TF$1,090.18
FPM925T$726.82
GPM18200TF-B$3,335.52
HPM908T-B$814.72
IPM975TF-B$1,237.94
JPM18100TF-B$1,530.40
KPM950AT-B$999.40
LPM916T$709.14
MAPM925T$726.82
NPM950TF$872.60
OPM9100TF$1,318.82
PPM18300TF-B$4,409.50
QPM925AT-B$832.84
RPM1875T-WD$1,749.54
SPM18100TF-5/8-B$1,530.40
TAPM916T$709.14
UPM9100TF-B$1,530.40
VAPM925AT-B$828.38
WPM18200TF$2,902.62
XPM1850TF$945.42
YPM18150TF$2,537.06
DAYTON -

348 Series DC Gearmotors, 90 VDC, TENV

Dayton 348 Series DC gearmotors are designed to operate equipment, such as wheelchairs, hospital beds, table lifts and power seats with a gear system . They are ideal for desired ratio and torque applications. These 90VDC rated motors provide high starting force and precision variable-speed control. TENV housing includes a motor, gears and bearings having die-cast aluminium construction. The motor rotates the permanent magnet parallel shaft at a maximum speed of 170 RPM in both clockwise and anti-clockwise directions. These motors feature face base mounting which allows them to be mounted both vertically and horizontally. Choose from a wide range of these DC gearmotors, available in 11:1, 28:1, 82:1, 58:1, 36:1 and 19:1 gear ratios on Raptor Supplies.

StyleModelGear RatioMax. TorqueNameplate RPMRPM RangePrice (ex. VAT)
A4Z12811:143 in.-lb.170151 to 200$529.59
A4Z38119:177 in.-lb.9476 to 100$637.15
A4Z38228:1113 in.-lb.6451 to 75$506.66
A4Z12936:1138 in.-lb.5031 to 50$744.64
A4Z38358:1220 in.-lb.3131 to 50$662.33
A4Z13082:1280 in.-lb.2216 to 30$549.13
DAYTON -

DC Gearmotors

Dayton 3X Series DC gear motors are manufactured to move an object in desired direction at a required rate of speed while offering power. They feature a completely enclosed nonventilated enclosure for use in harsh environments. They further have heavy-duty steel worm gears, a die-cast aluminium gear case, bronze alloy output gears and ball bearings on the output and motor. Choose from a range of these DC gearmotors, available in 1/8 and 1/4 input power ratings.

StyleModelGear RatioBearingsBrushesGear TypeHousing MaterialInput HPInsulation ClassLength Less ShaftPrice (ex. VAT)
A52JE58--------$87.36
RFQ
B151-241-6041B--------$463.23
RFQ
B151-201-4261B--------$416.61
RFQ
B151-201-0241B--------$435.19
RFQ
B151-201-1351B--------$564.08
RFQ
C3XA775:1Oversized BallExternally ReplaceableWormDie Cast Aluminum1/8F-$683.33
C3XA835:1Oversized BallExternally ReplaceableWormDie Cast Aluminum1/4F-$793.80
C3XA8410:1Oversized BallExternally ReplaceableWormDie Cast Aluminum1/4F-$827.09
C3XA7810:1Oversized BallExternally ReplaceableWormDie Cast Aluminum1/8F-$704.85
C3XA7920:1Oversized BallExternally ReplaceableWormDie Cast Aluminum1/8F-$651.56
C3XA8520:1Oversized BallExternally ReplaceableWormDie Cast Aluminum1/4F-$815.83
C3XA8030:1Oversized BallExternally ReplaceableWormDie Cast Aluminum1/8F-$647.85
C3XA8630:1Oversized BallExternally ReplaceableWormDie Cast Aluminum1/4F-$795.50
C3XA8145:1Oversized BallExternally ReplaceableWormDie Cast Aluminum1/8F-$650.70
C3XA8260:1Oversized BallExternally ReplaceableWormDie Cast Aluminum1/8F-$699.08
D1L84860:1Needle with Thrust Ball on Output Shaft, Ball on MotorExternally Replaceable-Die Cast Aluminum1/8-10.375"$649.79
E52JE6078.6:1Sintered Bronze SleeveYesSpurDie Cast Zinc1/50B3 39/64"$88.81
F2H588116:1Needle Throughout with Thrust Balls on Case, Ball on MotorExternally ReplaceableHelical and SpurDie Cast Aluminum1/6-12.5"$956.43
E52JE54139.8:1Sintered Bronze SleeveYesSpurDie Cast Zinc1/125B3"$61.73
E52JE53273.8:1Sintered Bronze SleeveYesSpurDie Cast Zinc1/125B3"$61.93
E52JE59300:1Sintered Bronze SleeveYesSpurDie Cast Zinc1/50B3 39/64"$88.35
E52JE52384:1Sintered Bronze SleeveYesSpurDie Cast Zinc1/125B3"$62.05
E52JE51594.4:1Sintered Bronze SleeveYesSpurDie Cast Zinc1/125B3"$68.33
E52JE50938.2:1Sintered Bronze SleeveYesSpurDie Cast Zinc1/175B3"$68.15
E52JE571430.8:1Sintered Bronze SleeveYesSpurDie Cast Zinc1/200B3"$92.36
DAYTON -

DC Gearmotors, Permanent Magnet Motor Design

Dayton DC gearmotors use DC power source to provide high torque and variable speed control, especially where space & power are limited. These units feature parallel shaft orientation to choose the ratio & torque required for specific operations, such as conveyor systems, wheel chairs, hospital beds, table lifts and power seats. They consist of a motor, gear and bearings to smoothly change the direction at low speeds and handle sudden stops, without causing wear to the moving parts. These gearmotors also feature TENV (totally enclosed non-ventilated) enclosures to restrict circulation of outside air and contaminants and can be easily mounted in small spaces in multiple positions. Choose from a wide range of these DC gearmotors, available in 1/8, 1/4 and 1/10 hp motor power ratings.

StyleModelMax. TorqueBearingsFull Load AmpsMotor TypeNameplate RPMOverhung LoadReplacement BrushesRPM RangePrice (ex. VAT)
A1LPX830.0 in.-lb.Ball and Needle on Case, Ball on Motor1.10Permanent Magnet152300 lb.6YHY6151 to 200$488.98
B4ZJ4860.0 in.-lb.Needle with Thrust Ball on Output Shaft, Ball on Motor5.45Permanent Magnet DC120250 lb.6YHY5100 to 150$625.46
C6Z910100 in.-lb.Needle on Case Output Shaft, Ball on Motor0.36Permanent Magnet DC2.690 lb.6YHY30 to 15$481.05
D6Z412101.0 in.-lb.Heavy Duty Ball and Thrust Balls on Case, Ball on Motor2.70Permanent Magnet DC148325 lb.6YHY9100 to 150$1,035.86
A1LPY1105.0 in.-lb.Ball and Needle on Case, Ball on Motor1.10Permanent Magnet42300 lb.6YHY631 to 50$568.89
B4ZJ47113.0 in.-lb.Needle with Thrust Ball on Output Shaft, Ball on Motor5.45Permanent Magnet DC64291 lb.6YHY551 to 75$639.50
D6Z411152.0 in.-lb.Heavy Duty Ball and Thrust Balls on Case, Ball on Motor2.70Permanent Magnet DC91325 lb.6YHY976 to 100$1,301.36
A1LPY2156.0 in.-lb.Ball and Needle on Case, Ball on Motor1.10Permanent Magnet29300 lb.6YHY616 to 30$540.95
D6Z410238.0 in.-lb.Heavy Duty Ball and Thrust Balls on Case, Ball on Motor2.70Permanent Magnet DC63325 lb.6YHY951 to 75$1,128.50
B4ZJ46254.0 in.-lb.Needle with Thrust Ball on Output Shaft, Ball on Motor4.50Permanent Magnet DC20500 lb.6YHY516 to 30$658.16
B4ZJ45310.0 in.-lb.Needle with Thrust Ball on Output Shaft, Ball on Motor2.50Permanent Magnet DC8.3695 lb.6YHY50 to 15$658.16
D6Z409353.0 in.-lb.Heavy Duty Ball and Thrust Balls on Case, Ball on Motor2.70Permanent Magnet DC43325 lb.6YHY931 to 50$1,168.84
StyleModelFull Load AmpsGear RatioMax. TorqueNameplate RPMOverhung LoadRPM RangePrice (ex. VAT)
A2H5792.3043:1280 in.-lb.42215 lb.31 to 50$765.49
A2H5732.5111:190 in.-lb.165200 lb.151 to 200$647.29
A2H5772.5129:1235 in.-lb.62235 lb.51 to 75$739.46
A2H5752.5119:1160 in.-lb.90200 lb.76 to 100$695.81
A2H5712.515:140 in.-lb.350170 lb.251 to 500$764.35
DAYTON -

5L Series DC Gearmotors, TENV, Die Cast Zinc

Dayton 5L Series DC gearmotors provide high starting torque and precise variable-speed control for controlling wheelchairs, hospital beds, table lifts, power seats & more. They are powered by a DC power source for running TENV motor which in turns rotate the shaft with a maximum torque of 280 in-lb. The shaft can rotate in both clockwise and counterclockwise directions. These motors feature gear oil lubrication and ball bearings for smooth operation. The Class F insulation ensures operation even at high temperatures. Choose from a wide range of DC gearmotors, available in 12, 24 and 90VDC voltage ratings on Raptor Supplies.

StyleModelFull Load AmpsGear RatioMax. TorqueNameplate RPMRPM RangeVoltagePrice (ex. VAT)
A5LAE81.4182:1280.0 in.-lb.2216 to 3090 VDC$753.40
A5LAF11.7228:1123.0 in.-lb.6451 to 7590 VDC$727.50
A5LAE91.7260:1266.0 in.-lb.3016 to 3090 VDC$777.21
A5LAF01.7244:1196.0 in.-lb.4031 to 5090 VDC$727.50
A5LAF21.7323:1103.0 in.-lb.7776 to 10090 VDC$727.50
A5LAF32.0110:147.0 in.-lb.177151 to 20090 VDC$666.80
A5LAG05.282:1280.0 in.-lb.2016 to 3024 VDC$648.41
A5LAG16.360:1266.0 in.-lb.2616 to 3024 VDC$635.45
A5LAG26.344:1196.0 in.-lb.3631 to 5024 VDC$695.10
A5LAG4823:1137.0 in.-lb.6551 to 7524 VDC$702.20
A5LAG3828:1165.0 in.-lb.5451 to 7524 VDC$673.95
A5LAG5810:163.0 in.-lb.150100 to 15024 VDC$645.95
A5LAF410.482:1280.0 in.-lb.2016 to 3012 VDC$727.50
A5LAF71628:1165.0 in.-lb.5451 to 7512 VDC$717.83
A5LAF91610:163.0 in.-lb.150100 to 15012 VDC$655.80
DAYTON -

483 Series DC Gearmotors

Dayton 483 Series DC gearmotors operate equipment with gear systems, such as wheelchairs, hospital beds, table lifts and power seats. They are ideal for desired ratio and torque applications. These 90VDC motors provide high starting force and precision variable-speed control. The housing includes a motor, gears and bearings featuring die-cast aluminium construction. These motors rotate the parallel shaft to move an object in both clockwise and anti-clockwise directions. These motors have face base mounting which allows them to be mounted both vertically and horizontally. Choose from a wide range of these DC gearmotors, available in TENV and TEFC motor enclosures on Raptor Supplies.

StyleModelOverall LengthEnclosureFull Load AmpsRPM RangeGear RatioInput HPLength Less ShaftMax. TorquePrice (ex. VAT)
A6Z40613.25"TENV2.000 to 15196:11/411.75"1087 in.-lb.$1,339.15
A6Z40813.25"TENV2.7016 to 3087:11/411.75"727 in.-lb.$1,384.88
A6Z40713.25"TENV2.600 to 15131:11/411.75"960 in.-lb.$1,384.88
B6Z41415.5"TEFC5.0031 to 5050:11/214"822 in.-lb.$1,463.23
C6Z41815.5"TEFC5.00100 to 15012:11/214"202 in.-lb.$1,455.39
D6Z41515.5"TEFC5.0031 to 5041:11/214"664 in.-lb.$1,330.56
E6Z41315.5"TEFC4.2016 to 3087:11/214"1112 in.-lb.$1,464.99
F6Z41715.5"TEFC5.0076 to 10019:11/214"305 in.-lb.$1,455.39
G6Z41615.5"TEFC5.0051 to 7528:11/214"464 in.-lb.$1,336.34
DAYTON -

600 Series DC Gearmotor

Dayton 600 Series DC gearmotors offer superior starting force and accurate variable-speed control; ideal for installation in hospital beds, wheelchairs, table lifts and power seats. These gearmotors need a DC power source and come equipped with a motor, gear, and bearings in a housing. They are available in 9.875 and 12.5 inch lengths.

StyleModelReplacement BrushesFull Load AmpsGear RatioInput HPLength Less ShaftMax. TorqueNameplate RPMOverall LengthPrice (ex. VAT)
A2H5946YHY30.361413:11/209.875"710 in.-lb.1.311.75"$872.21
A2H5906YHY61.70138:11/612.5"660 in.-lb.1314.375"$950.99
A2H5926YHY61.00276:11/612.5"710 in.-lb.6.514.375"$932.36
DAYTON -

Dc Gearmotor

Dayton DC gearmotors, a combination of a motor and a gearbox, are used to reduce the speed and increase the torque output. These motors come in multiple voltage variants and support a maximum torque of 1112 in.-lb, which is ideal for variable-speed applications such as power seats, windshield wipers and wheelchairs. Dayton motors are UL and C-UL recognised and are widely opted for automotive, food-service, sports, packaging and electrical applications.

StyleModelGear TypeBearing TypeBearingsHousing MaterialHPInput HPInsulation ClassKeyway SizePrice (ex. VAT)
A1LPV3--Porous Bronze Sleeve on Case, Ball on MotorDie Cast Zinc-1/30FFlat$287.15
B1LPL1--Porous Bronze Sleeve on Case, Ball on MotorDie Cast Zinc-1/15F#605 Woodruff Key$622.20
C6ML68--Heavy Duty Ball, Needle Roller and Thrust Balls on Case, Ball on MotorDie Cast Aluminum-1/4--$818.00
C6ML62--Heavy Duty Ball, Needle Roller and Thrust Balls on Case, Ball on MotorDie Cast Aluminum-1/4--$813.99
A1LPW1--Porous Bronze Sleeve on Case, Ball on MotorDie Cast Zinc-1/30FFlat$340.48
A1LPW2--Porous Bronze Sleeve on Case, Ball on MotorDie Cast Zinc-1/30FFlat$349.41
A1LPW3--Porous Bronze Sleeve on Case, Ball on MotorDie Cast Zinc-1/30FFlat$342.63
A1LPW5--Porous Bronze Sleeve on Case, Ball on MotorDie Cast Zinc-1/30FFlat$355.71
A1LPV9--Porous Bronze Sleeve on Case, Ball on MotorDie Cast Zinc-1/30FFlat$327.98
A1LPV8--Porous Bronze Sleeve on Case, Ball on MotorDie Cast Zinc-1/30FFlat$309.78
A1LPV7--Porous Bronze Sleeve on Case, Ball on MotorDie Cast Zinc-1/30FFlat$306.76
A1LPV6--Porous Bronze Sleeve on Case, Ball on MotorDie Cast Zinc-1/30FFlat$290.98
A1LPV5--Porous Bronze Sleeve on Case, Ball on MotorDie Cast Zinc-1/30FFlat$291.00
B1LPK4--Porous Bronze Sleeve on Case, Ball on MotorDie Cast Zinc-1/15F#605 Woodruff Key$498.11
A1LPV4-Ball on Motor, Porous Bronze Sleeve on CasePorous Bronze Sleeve on Case, Ball on MotorZinc1/30 hp1/30FFlat$282.33
B1LPK9--Porous Bronze Sleeve on Case, Ball on MotorDie Cast Zinc-1/15F#605 Woodruff Key$503.36
B1LPK3--Porous Bronze Sleeve on Case, Ball on MotorDie Cast Zinc-1/15F#605 Woodruff Key$484.13
B1LPK2--Porous Bronze Sleeve on Case, Ball on MotorDie Cast Zinc-1/10F#605 Woodruff Key$492.35
B1LPK1--Porous Bronze Sleeve on Case, Ball on MotorDie Cast Zinc-1/10F#605 Woodruff Key$456.35
A1LPW4--Porous Bronze Sleeve on Case, Ball on MotorDie Cast Zinc-1/30FFlat$337.41
B1LPK5--Porous Bronze Sleeve on Case, Ball on MotorDie Cast Zinc-1/15F#605 Woodruff Key$499.41
B1LPK6--Porous Bronze Sleeve on Case, Ball on MotorDie Cast Zinc-1/15F#605 Woodruff Key$504.69
B1LPK7--Porous Bronze Sleeve on Case, Ball on MotorDie Cast Zinc-1/15F#605 Woodruff Key$493.75
B1LPK8--Porous Bronze Sleeve on Case, Ball on MotorDie Cast Zinc-1/15F#605 Woodruff Key$542.51
C6ML64--Heavy Duty Ball, Needle Roller and Thrust Balls on Case, Ball on MotorDie Cast Aluminum-1/8--$781.80
BISON GEAR & ENGINEERING -

DC Gearmotors

StyleModelPrice (ex. VAT)
A011-175-0010$786.44
B011-190-0049$795.61
B011-190-0037$853.83
C021-756-4420$999.05
B011-190-0019$592.51
D011-336-4011$993.55
C021-756-4413$884.38
B011-190-0013$655.06
A011-175-0013$982.51
A011-175-0007$771.98
D011-336-4005$1,025.15
D011-348-4040$1,174.16
BISON GEAR & ENGINEERING -

DC Gearmotor 180VDC 7.5 rpm 1/8 HP 240 1

ModelItemPrice (ex. VAT)
021-725F0240AH4ZYK$1,220.69

DC Gearmotors

DC gearmotors integrate a motor and a gearbox to facilitate the reduction of speed and promotion of torque. These motors can withstand maximum torque in steady state and can be installed in areas with limited space. They have a low form factor for low hysteresis loss and are ideal for medium and heavy-duty gear type mechanisms. We offer a variety of these brushed and brushless motors from leading manufacturers like Dayton, Baldor and Bison. Most of the products are UL, CSA and CE approved and are available in 12VDC, 24VDC, 90VDC and 180VDC variants with options in TENV, TEFC and vented enclosures. For a variety of automotive, packaging and electrical applications, these motors are offered in different horsepower and torque ratings.

We are here to help!

Looking for a part not listed here?